Adoptable Cookbooks List

Looking for a cookbook to adopt? You can now see a list of cookbooks available for adoption!
List of Adoptable Cookbooks

Supermarket Belongs to the Community

Supermarket belongs to the community. While Chef has the responsibility to keep it running and be stewards of its functionality, what it does and how it works is driven by the community. The chef/supermarket repository will continue to be where development of the Supermarket application takes place. Come be part of shaping the direction of Supermarket by opening issues and pull requests or by joining us on the Chef Mailing List.

Select Badges

Select Supported Platforms

Select Status

RSS

kafka (36) Versions 3.1.9

Installs and configures a Kafka broker

Policyfile
Berkshelf
Knife
cookbook 'kafka', '= 3.1.9', :supermarket
cookbook 'kafka', '= 3.1.9'
knife supermarket install kafka
knife supermarket download kafka
README
Dependencies
Changelog
Quality 50%

kafka cookbook

Cookbook Version
Build Status
OpenCollective
OpenCollective
License

Installs and configures Kafka >= v0.8.1.

Initially based on the Kafka cookbook released by Webtrends (thanks!), but with a few
notable differences:

  • does not depend on runit cookbook.
  • does not depend on zookeeper cookbook, thus it will not search for nodes with a specific role or such, that is left up to you to decide.
  • intended to be used by wrapper cookbooks.

Maintainers

This cookbook is maintained by the Sous Chefs. The Sous Chefs are a community of Chef cookbook maintainers working together to maintain important cookbooks. If you’d like to know more please visit sous-chefs.org or come chat with us on the Chef Community Slack in #sous-chefs.

Requirements

This cookbook does not depend on any specific cookbooks, but it requires that
java is installed on the system, thus the java cookbook is recommended.

Furthermore, Kafka requires ZooKeeper for coordination, and this cookbook does
not install or manage ZooKeeper to any extent.
A general recommendation is to not run Kafka and ZooKeeper on the same hardware.

Chef 13+

Platform

  • Amazon Linux
  • CentOS 6 and 7
  • Debian 7 and 8
  • Fedora 21
  • Ubuntu 14.04

The platforms / versions listed above are the ones that are included in
.kitchen.yml and/or tested in the wild, so it might work on other platforms as
well, YMMV.

Attributes

In order to keep the README in some kind of manageable state (and thus in sync
with attributes), attributes are documented inline (in the attribute files
that is).

Attributes concerning configuration of a Kafka broker are to be set under the
broker namespace, as such:

node.default['kafka']['broker']['log.dirs'] = %w[/tmp/kafka-logs]
node.default['kafka']['broker']['num.io.threads'] = 4
node.default['kafka']['broker']['zookeeper.connect'] = %w[localhost:2181]

The attribute names match the configuration names that Kafka uses to make it
easier to support new and old versions of Kafka simultaneously, by avoiding
"hardcoded" attribute names for configuration options, so please refer to the
official documentation for the release at your hand.

Refer to the official documentation for the version of Kafka that you're
installing.
Documentation for the latest release can be found over here.

Recipes

This section describes the different recipes that are available.

default

Downloads and installs Kafka from the official binary releases.
Defaults to installing v1.1.1 of Kafka.

Controlling restart of Kafka brokers in a cluster

Any changes made to the broker configuration could result in a restart of the
Kafka broker, if the kafka.automatic_restart attribute is set to true.
If Chef runs as a daemon on all of the nodes this could result in all of the Kafka
brokers being brought down at the same time, resulting in unavailability of
service.

If unavailability is an issue, this cookbook provides an option to implement custom
logic to control the restart of Kafka brokers so that not all of the brokers in
a cluster are stopped at the same time.
For example the custom logic can be something along the lines of acquiring a lock
in ZooKeeper and when held the broker is allowed to restart.
Be aware that a restart might take quite some time if you're using controlled
shutdown and have a lot of partitions, and Chef usually have some timeout for
each resource.

By default the resources in the _coordinate
recipe performs the start/restart of the kafka service.
If custom logic needs to be implemented, this recipe can be replaced with
another recipe, but don't forget to update the kafka.start_coordination.recipe
attribute.

The only requirement is that the new recipe has a ruby_block resource with
'coordinate-kafka-start' as ID.
The following is a sample recipe that shows roughly what one can do with this
feature.

ruby_block 'coordinate-kafka-start' do
  block do
    Chef::Log.info 'Custom recipe to coordinate Kafka start/restart'
  end
  action :nothing
  notifies :create, 'ruby_block[restart-coordination]', :delayed
end

ruby_block 'restart-coordination' do
  block do
    Chef::Log.info 'Implement the process to coordinate the restart, like using ZK'
  end
  action :nothing
  # `kafka_service_resource` is a helper method that will return the correct
  # resource name depending on whether you're using `runit` or not.
  notifies :restart, kafka_service_resource, :delayed
  notifies :create, 'ruby_block[restart-coordination-cleanup]', :delayed
end

ruby_block 'restart-coordination-cleanup' do
  block do
    Chef::Log.info 'Implement any cleanup logic required after restart like releasing locks'
  end
  action :nothing
end

Please refer to issue #58 for background of this feature.

FAQ

Kafka dies for no apparent reason (ulimit)

Depending on your system / infrastructure setup you might run into issues with
Kafka just sporadically dying for no obvious reason.
One thing you might want to look into is the file handle limit as Kafka tend to
keep a lot file handles open due to socket connections (depends on the number of
brokers, producers and consumers) and the actual data log files (depends on
the number of partitions and log segment and/or log roll settings).

It's possible to set a specific ulimit for Kafka using the node['kafka']['ulimit_file']
attribute.
If this value is not set, Kafka will use whatever the system default is, which
as stated previously might not be enough, so it might be wise to set a higher
limit.

How do I get started locally? (minimal required setup)

If you want to hit the ground running and just setup a single broker (or a
cluster for that matter) locally, these are the necessary broker attributes
that needs to be set (assumes that you have ZooKeeper running on port 2181
locally):

node.default['kafka']['broker']['zookeeper.connect'] = 'localhost:2181'
# This shouldn't normally be necessary, but might need to be set explicitly
# if you're having trouble connecting to the brokers.
node.default['kafka']['broker']['hostname'] = '127.0.0.1' # or perhaps 'localhost'

If you plan on running a cluster locally you will want to set separate
values for the following configuration options:

node.default['kafka']['broker']['broker.id'] = <id>
node.default['kafka']['broker']['port'] = <port>
node.default['kafka']['broker']['log.dirs'] = <dir path>

Other than that things should work as expected, though depending on what
platform you're running on, you might want to change the install and config
directories as well. See attributes/default.rb and recipes/_defaults.rb for
the default path regarding directories that Kafka will use.

Kafka killed prematurely (kill timeout)

When using controlled shutdown and either systemd or upstart as init
system you might run into issues with Kafka being killed before it has managed
to shutdown completely, resulting in long recovery times.

Not sure if it's possible to configure either systemd or upstart to not
automatically kill processes, but a workaround is to set kafka.kill_timeout to
a sufficiently high value.

Contributing

  • Fork the repository on Github
  • Create a named feature branch (like add-component-x)
  • Write your change
  • Check that your change works, for example with Vagrant
  • Submit a Pull Request using Github

Contributors

This project exists thanks to all the people who contribute.

Backers

Thank you to all our backers!

https://opencollective.com/sous-chefs#backers

Sponsors

Support this project by becoming a sponsor. Your logo will show up here with a link to your website.

https://opencollective.com/sous-chefs/sponsor/0/website
https://opencollective.com/sous-chefs/sponsor/1/website
https://opencollective.com/sous-chefs/sponsor/2/website
https://opencollective.com/sous-chefs/sponsor/3/website
https://opencollective.com/sous-chefs/sponsor/4/website
https://opencollective.com/sous-chefs/sponsor/5/website
https://opencollective.com/sous-chefs/sponsor/6/website
https://opencollective.com/sous-chefs/sponsor/7/website
https://opencollective.com/sous-chefs/sponsor/8/website
https://opencollective.com/sous-chefs/sponsor/9/website

Dependent cookbooks

This cookbook has no specified dependencies.

Contingent cookbooks

There are no cookbooks that are contingent upon this one.

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog,
and this project adheres to Semantic Versioning.

3.1.9 - 2023-02-23

Standardise files with files in sous-chefs/repo-management

3.1.8 - 2023-02-16

Standardise files with files in sous-chefs/repo-management

3.1.7 - 2023-02-15

3.1.6 - 2023-02-15

Standardise files with files in sous-chefs/repo-management

3.1.5 - 2023-02-14

3.1.4 - 2023-02-14

3.1.3 - 2022-12-09

Standardise files with files in sous-chefs/repo-management

Standardise files with files in sous-chefs/repo-management

  • Standardise files with files in sous-chefs/repo-management
  • Remove delivery folder

3.1.2 - 2021-08-30

  • Standardise files with files in sous-chefs/repo-management

3.1.1 - 2021-06-01

  • resolved cookstyle error: test/integration/default/serverspec/default_spec.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/helpers/serverspec/Gemfile:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/helpers/serverspec/spec_helper.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/helpers/serverspec/support/await_helper.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/helpers/serverspec/support/files_common.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/helpers/serverspec/support/platform_helpers.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/helpers/serverspec/support/service_common.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/runit/serverspec/required_files_spec.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/runit/serverspec/service_spec.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/systemd/serverspec/required_files_spec.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/systemd/serverspec/service_spec.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/sysv/serverspec/required_files_spec.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/sysv/serverspec/service_spec.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/upstart/serverspec/required_files_spec.rb:1:1 convention: Style/Encoding
  • resolved cookstyle error: test/integration/upstart/serverspec/service_spec.rb:1:1 convention: Style/Encoding

3.1.0

Added

  • Dokken tests
  • Migrated to Github Actions

Fixed

  • resolved cookstyle error: recipes/_install.rb:26:9 refactor: ChefCorrectness/ChefApplicationFatal
  • resolved cookstyle error: recipes/_install.rb:30:9 refactor: ChefCorrectness/ChefApplicationFatal

3.0.0

  • Move to Sous-Chefs organision

Collaborator Number Metric
            

3.1.9 passed this metric

Contributing File Metric
            

3.1.9 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must contain a CONTRIBUTING.md file

Cookstyle Metric
            

3.1.9 passed this metric

No Binaries Metric
            

3.1.9 passed this metric

Testing File Metric
            

3.1.9 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must contain a TESTING.md file

Version Tag Metric
            

3.1.9 failed this metric

Failure: To pass this metric, your cookbook metadata must include a source url, the source url must be in the form of https://github.com/user/repo, and your repo must include a tag that matches this cookbook version number