cookbook 'opennebula_ng', '= 0.2.0'
opennebula_ng (14) Versions 0.2.0 Follow0
Installs/Configures opennebula_ng
cookbook 'opennebula_ng', '= 0.2.0', :supermarket
knife supermarket install opennebula_ng
knife supermarket download opennebula_ng
opennebula_ng cookbook
A cookbook for managing OpenNebula via the Chef configuration management tool.
Supported Platforms
- Debian
- Ubuntu
Quickstart
To setup a minimal configuration, standalone OpenNebula server, set the following attributes to configure your network
node['opennebula_ng']['interfaces']['br0']['type'] = 'inet static' node['opennebula_ng']['interfaces']['br0']['address'] = '192.168.1.100' node['opennebula_ng']['interfaces']['br0']['network'] = '192.168.1.0' node['opennebula_ng']['interfaces']['br0']['netmask'] = '255.255.255.0' node['opennebula_ng']['interfaces']['br0']['broadcast'] = '192.168.1.255' node['opennebula_ng']['interfaces']['br0']['gateway'] = '192.168.1.1'
And run the following recipes:
- default
- sunstone
- node
- register_nodes
This will do the following things
- Install the Sunstone frontend
- Configure the network, add OpenNebula bridge
- Register the current host as an OpenNebula node
You should be able to connect to your new OpenNebula installation using http://yourhost.com:9869
Recipes
default
The default recpe just includes the apt_repository recipe
apt_repository
This recipe sets up the official OpenNebula PPA for Ubuntu (stable)
sunstone
This recipe installs and configures the sunstone frontend.
- Installs opennebula and opennebula-sunstone packages
- Takes care of SSH and authorized_keys configuration
node
This recipe turns your machine into an opennebula node
- Configures networking according to node attributes (DANGER: touches
/etc/network/interfaces) - Configures the OpenNebula bridge interface
- Configures qEMU
- Configures libvirt
MAKE SURE you configure the following attributes (e.g. create one file for each node in your
wrapper cookbooks attribute dir, e.g. attributes/myhost1.rb)
if node.name == 'myhost1' node['opennebula_ng']['interfaces']['br0']['type'] = 'inet static' node['opennebula_ng']['interfaces']['br0']['address'] = '192.168.1.100' node['opennebula_ng']['interfaces']['br0']['network'] = '192.168.1.0' node['opennebula_ng']['interfaces']['br0']['netmask'] = '255.255.255.0' node['opennebula_ng']['interfaces']['br0']['broadcast'] = '192.168.1.255' node['opennebula_ng']['interfaces']['br0']['gateway'] = '192.168.1.1' node['opennebula_ng']['interfaces']['br0']['bridge_ports'] = 'eth0' node['opennebula_ng']['interfaces']['br0']['bridge_fd'] = 9 node['opennebula_ng']['interfaces']['br0']['bridge_hello'] = 2 node['opennebula_ng']['interfaces']['br0']['bridge_maxage'] = 12 node['opennebula_ng']['interfaces']['br0']['bridge_stp'] = 'off' end
You can also configure additional interfaces, if required
node['opennebula_ng']['interfaces']['br1']['type'] = 'inet static' node['opennebula_ng']['interfaces']['br1']['address'] = '10.0.0.100' node['opennebula_ng']['interfaces']['br1']['network'] = '10.0.0.0' node['opennebula_ng']['interfaces']['br1']['netmask'] = '255.255.255.0' node['opennebula_ng']['interfaces']['br1']['broadcast'] = '10.0.0.255' node['opennebula_ng']['interfaces']['br1']['bridge_ports'] = 'eth1' node['opennebula_ng']['interfaces']['br1']['bridge_fd'] = 9 node['opennebula_ng']['interfaces']['br1']['bridge_hello'] = 2 node['opennebula_ng']['interfaces']['br1']['bridge_maxage'] = 12 node['opennebula_ng']['interfaces']['br1']['bridge_stp'] = 'off'
register_nodes
This recipe registers your hosts at oned.
The configuration is set via attributes, and supports all parameters that onehost supports.
The default is to register the node chef is currently running on, using kvm
# You can add all your nodes centrally here node['opennebula_ng']['nodes'] = { myhost1: { im: 'kvm', vm: 'kvm', net: 'dummy' }, myhost2: { im: 'kvm', vm: 'kvm', net: 'dummy' }, myhost3: { im: 'kvm', vm: 'kvm', net: 'dummy' }, }
virtual_networks
This recipe registers virtual networks using onenet.
You can specify your network configuration using the following attributes. Both fixed and ranged
networks are supported.
node['opennebula_ng']['virtual_networks'] = { frontnet: { TYPE: 'fixed', BRIDGE: 'br0', GATEWAY: '192.168.1.1', NETWORK_MASK: '255.255.255.0', NETWORK_ADDRESS: '192.168.1.0', DNS: '"208.67.222.222 208.67.220.220"', LEASES: ['[ IP=192.168.1.100 ]', '[ IP=192.168.1.101 ]'] }, backnet: { TYPE: 'ranged', BRIDGE: 'br1', NETWORK_MASK: '255.255.255.0', NETWORK_ADDRESS: '10.0.0.0', IP_START: '10.0.0.100', IP_END: '10.0.0.200', }, }
lvm
A recipe to configure LVM datastores.
- Installs and configures lvm packages
- Creates datastores according to attributes
You can configure the datastores using the following attributes:
node['opennebula_ng']['lvm']['datastores'] = { 'my datastore' => { DS_MAD: 'lvm', TM_MAD: 'lvm', DISK_TYPE: 'BLOCK', VG_NAME: 'vg-one', BRIDGE_LIST: node['hostname'], # Add all hostnames of hosts accessing this datastore } }
nfs_server
This recipe configures the host to be a NFS server. It can be configured using the following
attributes:
# Network to export NFS directories to, defaults to all hosts node['opennebula_ng']['nfs']['network'] = '*' # or a network like e.g. '10.0.0.0/24' # NFS fsid. Must be unique node['opennebula_ng']['nfs']['fsid'] = 1 # Hostname/IP of the NFS server (usually the frontend machine) node['opennebula_ng']['nfs']['server'] = 'myhost1'
nfs_client
Configures the host to be an NFS client, mouting /var/lib/one from the server stored in
node['opennebula_ng']['nfs']['server']
Other attributes
You can configure the location of the "oneadmin" home directory and auth file in case needed.
node['opennebula_ng']['one_auth'] = '/var/lib/one/.one/one_auth' node['opennebula_ng']['one_home'] = '/var/lib/one'
Notes
Please be aware, that you probably want a reverse proxy like nginx incl. SSL
before you deploy OpenNebula to your production servers.
You can easily do this e.g. using the
certificate and
nginx cookbooks.
Contributing
- Fork the repository on Github
- Create a named feature branch (i.e.
add-new-recipe) - Write you change
- Write tests for your change (if applicable)
- Run the tests, ensuring they all pass
- Submit a Pull Request
License
| Author: | Chris Aumann (me@chr4.org) |
| Copyright: | Copyright (c) 2014 Vaamo Finanz AG |
| License: | Apache License, Version 2.0 |
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Dependent cookbooks
| apt >= 0.0.0 |
| nfs >= 0.0.0 |
Contingent cookbooks
There are no cookbooks that are contingent upon this one.
0.1.0
- Initial release of opennebula_ng
