Adoptable Cookbooks List

Looking for a cookbook to adopt? You can now see a list of cookbooks available for adoption!
List of Adoptable Cookbooks

Supermarket Belongs to the Community

Supermarket belongs to the community. While Chef has the responsibility to keep it running and be stewards of its functionality, what it does and how it works is driven by the community. The chef/supermarket repository will continue to be where development of the Supermarket application takes place. Come be part of shaping the direction of Supermarket by opening issues and pull requests or by joining us on the Chef Mailing List.

Select Badges

Select Supported Platforms

Select Status


stig (39) Versions 0.6.2

Installs/Configures CIS STIG benchmarks

cookbook 'stig', '= 0.6.2', :supermarket
cookbook 'stig', '= 0.6.2'
knife supermarket install stig
knife supermarket download stig
Quality 33%

STIG Cookbook

Installs and configures the CIS CentOS Linux 6 benchmark.

These sets of recipes aim to harden the operating system in order to pass all scored CIS benchmarks and optionally all unscored CIS benchmarks.

More information about CIS benchmarks may be found at



  • CentOS 6.x


  • logrotate
  • sysctl


  • auditd, ~> 1.0.1



  • node['stig']['grub']['hashedpassword'] = The hashed grub password to use. Ex: openssl passwd -1 ChangeMe (String (MD5 Hash))

  • node['stig']['limits'] = A hash of items that go into /etc/security/limits.conf (Array of Hashes of Hashes)

  • node['stig']['auditd'] = See: Auditd Configuration

  • node['stig']['mount_disable']['cramfs'] = Disable cramfs filesystem (Boolean)

  • node['stig']['mount_disable']['freevxfs'] = Disable freevxfs filesystem (Boolean)

  • node['stig']['mount_disable']['jffs2'] = Disable jffs2 filesystem (Boolean)

  • node['stig']['mount_disable']['hfs'] = Disable hfs filesystem (Boolean)

  • node['stig']['mount_disable']['hfsplus'] = Disable hfsplus filesystem (Boolean)

  • node['stig']['mount_disable']['squashfs'] = Disable squashfs filesystem (Boolean)

  • node['stig']['mount_disable']['udf'] = Disable udf filesystem (Boolean)

  • node['stig']['mail_transfer_agent']['inet_interfaces'] = Configure Mail Transfer Agent for Local-Only Mode - If the system is intended to be a mail server, change from "localhost" (String)

  • node['stig']['network']['zeroconf'] = Disable Avahi Server (true = disabled, false = enabled) (Boolean)

  • node['stig']['network']['ip_forwarding'] = Disable IP Forwarding (true = enabled, false = disabled) (Boolean)

  • node['stig']['network']['packet_redirects'] = Disable Send Packet Redirects (true = enabled, false = disabled) (Boolean)

  • node['stig']['network']['icmp_redirect_accept'] = Disable ICMP Redirect Acceptance (true = enabled, false = disabled) (Boolean)

  • node['stig']['network']['icmp_all_secure_redirect_accept'] = Disable Secure ICMP Redirect Acceptance (true = enabled, false = disabled) (

  • node['stig']['network']['log_suspicious_packets'] = Log Suspicious Packets (true = enabled, false = disabled) (Boolean)

  • node['stig']['network']['rfc_source_route_validation'] = Enable RFC-recommended Source Route Validation (true = enabled, false = disabled) (Boolean)

  • node['stig']['network']['ipv6_redirect_accept'] = Disable IPv6 Redirect Acceptance (true = enabled, false = disabled) (Boolean)

  • node['stig']['network']['hosts_allow'] = Create /etc/hosts.allow - An array of <net>/<mask> combinations or 'ALL' (Array of String)

  • node['stig']['network']['hosts_deny'] = Create /etc/hosts.deny - An array of <net>/<mask> combinations or 'ALL' (Array of String)

  • node['stig']['network']['disable_dcpp'] = Disable DCCP (true = disable, false = enable) (Boolean)

  • node['stig']['network']['disable_sctp'] = Disable SCTP (true = disable, false = enable) (Boolean)

  • node['stig']['network']['disable_rds'] = Disable RDS (true = disable, false = enable) (Boolean)

  • node['stig']['network']['disable_tipc'] = Disable TIPC (true = disable, false = enable) (Boolean)

  • node['stig']['network']['ipv6'] = Disable IPV6 ("no" = disable, "yes" = enable) (String)

( See )
- node['sysctl']['*'] = Sets configuration in sysctl config file. See default attributes.

  • node['stig']['logging']['rsyslog_rules'] = Configure /etc/rsyslog.conf - Include rules for logging in array with space separating rule with log location (Array of String)
  • node['stig']['logging']['rsyslog_rules_rhel'] = Configure /etc/rsyslog.conf for RHEL - Include rules for logging in array with space separating rule with log location (Array of String)
  • node['stig']['logging']['rsyslog_rules_debian'] = Configure /etc/rsyslog.conf for Debian - Include rules for logging in array with space separating rule with log location (Array of String)

  • node['stig']['selinux']['enabled'] = By default, SELinux is enabled. However, there may be reasons to shut it off (Boolean)

  • node['stig']['selinux']['status'] = Possible values: enforcing, permissive (String)

  • node['stig']['selinux']['type'] = Possible values: targeted, mls (String)

  • node['stig']['sshd_config']['allow_agent_forwarding'] = (String) Specifies whether ssh-agent forwarding is permitted. Default: 'yes'

  • node['stig']['sshd_config']['allow_tcp_forwarding'] = Specifies whether TCP forwarding is permitted. Default: yes (String)

  • node['stig']['sshd_config']['allow_users_set_env_opts'] = (String) Allow Users to Set Environment Options. Default: 'no'

  • node['stig']['sshd_config']['authentication_methods'] = Specifies the authentication methods that must be successfully completed for a
    user to be granted access.This option must be followed by one or more comma-separated
    lists ofauthentication method names.Successful authentication requires completion
    of every method in at leastone of these lists.
    This option is only available for SSH protocol 2. Default: [] (Array, String)

  • node['stig']['sshd_config']['authorized_keys_command'] = Specifies a program to be used to look up the user's public keys. Default: '' (String)

  • node['stig']['sshd_config']['authorized_keys_command_user'] = Specifies the user under whose account the AuthorizedKeysCommand is run.It is recommended to use a dedicated user that has no other role on the hostthan running authorized keys commands. Default: '' (String)

  • node['stig']['sshd_config']['authorized_keys_file'] = Specifies the file that contains the public keys that can be used for user authentication. Default: '.ssh/authorized_keys' (String)

  • node['stig']['sshd_config']['authorized_keys_command_run_as'] = Specifies the user under whose account the AuthorizedKeysCommand is run. Default: '' (String)

  • node['stig']['sshd_config']['authorized_principals_file'] = Specifies a file that lists principal names that are accepted for certificate authentication. Default: 'none' (String)

  • node['stig']['sshd_config']['chroot_directory'] = Specifies the pathname of a directory to chroot to after authentication. Default: 'none' (String)

  • node['stig']['sshd_config']['client_alive_count_max'] = Sets the number of client alive messages which may besent without sshd receiving any messages back from the client. Default: '3' (String)

  • node['stig']['sshd_config']['client_alive_interval'] = Sets a timeout interval in seconds after which if no data has been received from the client. Default: '0' (String)

  • node['stig']['sshd_config']['compression'] = Specifies whether compression is allowed, or delayed untilt he user has authenticated successfully. The argument must be 'yes' 'delayed' or 'no'. Default: 'delayed' (String)

  • node['stig']['sshd_config']['force_command'] = Forces the execution of the command specified by ForceCommand ignoring any command supplied by the client and ~/.ssh/rc if present. Default: '' (String)

  • node['stig']['sshd_config']['gateway_ports'] = Specifies whether remote hosts are allowed to connect to ports forwarded for the client. (String), Default: 'no'

  • node['stig']['sshd_config']['gss_api_authentication'] = (String) Specifies whether user authentication based on GSSAPI is allowed. Note that this option applies to protocol version 2 only. Default: 'no'

  • node['stig']['sshd_config']['gss_api_key_exchange'] = (String) Allow GSSAPI user authentication using the 'gssapi-with-mic' mechanism. Default: 'no'

  • node['stig']['sshd_config']['gss_cleanup_credentials'] = (String) Specifies whether to automatically destroy the user's credentials cache on logout. Default: 'yes'

  • node['stig']['sshd_config']['gss_api_store_credentials_on_rekey'] = (String) Controls whether the user's GSSAPI credentials should be updated following a successful connection rekeying. Default: 'no'

  • node['stig']['sshd_config']['gss_api_strict_acceptor_check'] = (String) Determines whether to be strict about the identity of the GSSAPI acceptor a client authenticates against. Default: 'yes'

  • node['stig']['sshd_config']['host_based_auth'] = (String) Specifies whether rhosts or /etc/hosts.equiv authentication together with successful public key client host authentication is allowed (host-based authentication). Default: 'no'

  • node['stig']['sshd_config']['host_based_uses_name_from_packet_only'] = (String) Specifies whether or not the server will attempt to perform a reversename lookup when matching the name in the ~/.shosts ~/.rhosts and/etc/hosts.equiv files during HostbasedAuthentication, Default: 'no'

  • node['stig']['sshd_config']['host_certificate'] = Specifies a file containing a public host certificate (String), Default: ''

  • node['stig']['sshd_config']['ignore_rhosts'] = (String) Specifies that .rhosts and .shosts files will not be used in RhostsRSAAuthenticationorHostbasedAuthentication, Default: 'yes'

  • node['stig']['sshd_config']['ignore_user_known_hosts'] = (String) Specifies whether sshd should ignore the user's ~/.ssh/known_hosts during RhostsRSAAuthenticationorHostbasedAuthentication. Default: 'no'

  • node['stig']['sshd_config']['kerberos_authentication'] = (String) Specifies whether the password provided by the user for PasswordAuthentication will be validated through the Kerberos KDC, Default: 'no'

  • node['stig']['sshd_config']['kerberos_or_local_passwd'] = (String) If set then if password authentication through Kerberos fails then the password will be validated via any additional local mechanism such as /etc/passwd, Default: 'yes'

  • node['stig']['sshd_config']['kerberos_ticket_cleanup'] = (String) Specifies whether to automatically destroy the user's ticket cache file on logout. Default: 'yes'

  • node['stig']['sshd_config']['kerberos_use_kuserok'] = (String) Specifies whether to look at .k5login file for user's aliases. Default: 'yes'

  • node['stig']['sshd_config']['key_regeneration_interval'] = In protocol version 1, the ephemeral server key is automatically regenerated after this many seconds (if it has been used). (String), Default: '3600'

  • node['stig']['sshd_config']['login_grace_time'] = The server disconnects after this time if the user has not successfully logged in. (String), Default: '120'

  • node['stig']['sshd_config']['log_level'] = Gives the verbosity level that is used when logging messages from sshd. Default: INFO (String)

  • node['stig']['sshd_config']['macs'] = Specifies the available MAC (message authentication code) algorithms. Default: 'hmac-md5,hmac-sha1,hmac-ripemd160,hmac-sha1-96,hmac-md5-96' (String)

  • node['stig']['sshd_config']['max_startups'] = Specifies the maximum number of concurrent unauthenticated connections to the sshd daemon. Default: '10:30:60' (String)

  • node['stig']['sshd_config']['max_auth_tries'] = SSHd Max auth tries (Integer)

  • node['stig']['sshd_config']['max_sessions'] = Specifies the maximum number of open sessions permitted per network connection (String), Default: '10'

  • node['stig']['sshd_config']['password_authentication'] = (String) Specifies whether password authentication is allowed. Default: 'yes'

  • node['stig']['sshd_config']['port'] = SSHd daemon port. Default: ['22'] (Array, String)

  • node['stig']['sshd_config']['permit_root_login'] = (String) Allow SSH root login. Default: 'no'

  • node['stig']['sshd_config']['permit_empty_passwords'] = (String) Allow SSH to permit empty passwords. Default: 'no'

  • node['stig']['sshd_config']['pid_file'] = Specifies the file that contains the process ID of the sshd daemon (String), Default: '/var/run/'

  • node['stig']['sshd_config']['print_last_log'] = (String) Specifies whether sshd should print the date and time when the user last logged in. Default: 'yes'

  • node['stig']['sshd_config']['print_motd'] = (String) Specifies whether sshd should print /etc/motd when a user logs in interactively. Default: 'yes'

  • node['stig']['sshd_config']['protocol'] = Specifies the protocol versions sshd supports. (String), Default: '2'

  • node['stig']['sshd_config']['pub_key_authentication'] = (String) Specifies whether public key authentication is allowed. Note that this option applies to protocol version 2 only. Default: 'yes'

  • node['stig']['sshd_config']['rhosts_rsa_authentication'] =(String) Specifies whether rhosts or /etc/hosts.equiv authentication. This option applies to protocol version 1 only. Default: 'no'

  • node['stig']['sshd_config']['rsa_authentication'] = (String) Specifies whether pure RSA authentication is allowed. This option applies to protocol version 1 only. Default: 'no'

  • node['stig']['sshd_config']['server_key_bits'] = Defines the number of bits in the ephemeral protocol version 1 server key. This option applies to protocol version 1 only. (String), Default: '768'

  • node['stig']['sshd_config']['show_patch_level'] = (String) Specifies whether sshd will display the patch level of the binary in the identification string This option applies to protocol version 1 only. Default: 'no'

  • node['stig']['sshd_config']['strict_modes'] = (String) Specifies whether sshd should check file modes and ownership of the user's files and home directory before accepting login. Default: 'yes'

  • node['stig']['sshd_config']['subsystem'] = Configures an external subsystem (e.g., file transfer daemon). (String), Default: 'sftp /usr/libexec/openssh/sftp-server'

  • node['stig']['sshd_config']['syslog_facility'] = Gives the facility code that is used when logging messages from sshd. (String), Default: 'AUTHPRIV'

  • node['stig']['sshd_config']['tcp_keepalive'] = (String) Specifies whether the system should send TCP keepalive messages to the other side. Default: 'yes'

  • node['stig']['sshd_config']['use_dns'] = (String) Specifies whether sshd should lookup the remote host name and check that the resolved host name for the remote IP address maps back to the very same IP address. Default: 'no'

  • node['stig']['sshd_config']['use_login'] = (String) Specifies whether login is used for interactive login sessions. Default: 'no'

  • node['stig']['sshd_config']['use_privilege_separation'] = (String) Specifies whether sshd separates privileges by creating an unprivileged child process to deal with incoming network traffic. Default: 'yes'

  • node['stig']['sshd_config']['version_addendum'] = Specifies a string to append to the regular version string to identify OS- or site-specific modifications (String), Default: ''

  • node['stig']['sshd_config']['x_11_display_offset'] = Specifies the first display number available for sshd's X11 forwarding. (Integer), Default: 10

  • node['stig']['sshd_config']['x_11_forwarding'] = (String) Specifies whether X11 forwarding is permitted. Default: 'yes'

  • node['stig']['sshd_config']['x_11_use_local_host'] = (String) Specifies whether sshd should bind the X11 forwarding server to the loopback address or to the wildcard address. Default: 'yes'

  • node['stig']['sshd_config']['x_auth_location'] = Specifies the full pathname of the xauth program (String), Default: ''

  • node['stig']['sshd_config']['banner_path'] = Set SSH login banner path (String)

  • node['stig']['sshd_config']['deny_users'] = List of users to deny SSH login to (Array of String)

  • node['stig']['sshd_config']['accept_env'] = Specifies what environment variables sent by the client will be copied into the session's environ. See: (Array, String), Default: Multiple

  • node['stig']['sshd_config']['address_family'] = Specifies which address family should be used by sshd(8). Valid arguments are 'any', 'inet' (use IPv4 only), or 'inet6' (use IPv6 only). (String), Default: any

  • node['stig']['sshd_config']['listen_address'] = Specifies the local addresses sshd(8) should listen on. (Array, String), Default: ['']

  • node['stig']['sshd_config']['host_key'] = pecifies a file containing a private host key used by SSH. (Array, String), Default: [

  • node['stig']['system_auth']['pass_reuse_limit'] = Limit password reuse - Represents the amount of passwords the user is forced to not reuse (Integer)

  • node['stig']['login_defs']['pass_max_days'] = Password expiration in days (Integer)

  • node['stig']['login_defs']['pass_min_days'] = Minimum wait time, in days, before changing password (Integer)

  • node['stig']['login_defs']['pass_warn_age'] = Number of days before password expires where system begins warning user (Integer)

  • node['stig']['login_banner']['motd'] = Login banner (String)

  • node['stig']['login_banner']['issue'] = Login banner (String)

  • node['stig']['login_banner']['issue_net'] = Login banner (String)

  • node["stig"]["mail_transfer_agent"]["inet_interfaces"] = The address the the mail transfer agent should listen on (String)


Simply include the default recipe (stig::default) on an instance that needs to be hardened. May also want to include the auditd recipe (stig::auditd) to set a custom auditd configuration file



Unless otherwise noted below, this software is in the public domain because it contains
materials that originally came from the United States Geological Survey, an agency of the
United States Department of Interior. For more information, see the official USGS
copyright policy at:

More information in license file

Dependent cookbooks

logrotate >= 0.0.0
sysctl >= 0.0.0

Contingent cookbooks

There are no cookbooks that are contingent upon this one.


  • 0.6.2

-- [] - More testing
-- [] - Updated auditd ruleset to include more rules
-- [] - Created ChefSpec testing for auditd_rules recipe
-- [] - Updated ServerSpec testing for all default auditd rules

  • 0.6.1
    -- [] - More rubocop fixes
    -- [] - Rework of sshd_config recipe to allow more customization
    -- [] - Updated templates to point to proper GitHub URL
    -- [] - Updated dependency version for sysctl cookbook in Berksfile
    -- [] - Fixed kitchen converge warnings

  • 0.6.0
    -- [] - fix some rubocop violations
    -- [] - switch to using chef inspec
    -- [] - remove Centos 6.6 and 6.8

    -- [] - bump version to 0.6.0
    -- [] - remove kitchen version pin.

  • 0.5.5
    -- [arothian@github] - Update aide to setup crontab for ubuntu

  • 0.5.4
    -- [] - Fix an issue with auth-config being improperly written to for pass reuse limit

  • 0.5.3
    -- [] - Switch sysctl write flags

  • 0.5.2
    -- [] - Ignore errors on unknown sysctl keys

  • 0.5.1
    -- [] - Included third-party sysctl cookbook as a hard-coupled dependency by calling it in proc_hard recipe

  • 0.5.0
    -- [] - Switched sysctl.conf template writing out and brought in the third-party sysctl cookbook to handle writing .d config file
    -- [] - Updated serverspec testing

  • 0.4.3
    -- [] - Updated to switch out which file in /etc/pam.d/system-auth* gets symlinked

  • 0.4.2
    -- [] - Fix most foodcritic errors and warnings
    -- [] - CIS 1.6.2 (Configure ExecShield) was removed in 2.0.0 of all CIS STIG. No longer testing for it
    -- [] - Added updates to SSHD config to allow boolean for password authentication
    -- [] - Updated system auth recipe to be less destructive to /etc/pam.d/system-auth since that may be updated by authconfig
    -- [] - Fixed a few tests

  • 0.4.1
    -- [] - Updated sshd config to include approved ciphers (RHEL6 STIG 6.2.11)
    -- [] - Added the ability to change ChallengeResponseAuthentication in sshd config
    -- [] - Added the ability to change UsePAM in sshd config

  • 0.4.0
    -- [] - Users may now add auditd rules directly as a series of attributes

  • 0.3.11
    -- [] - More Auditd fixes

  • 0.3.10
    -- [] - Fix auditd default parameters which break the build
    -- [] - Add documentation for new attributes

  • 0.3.9
    -- [] - Fully parameterized auditd configuration file
    -- [] - No longer calling the auditd cookbook directly from auditd.rb
    -- [] - Auditd cookbook is no longer a direct dependency of the STIG cookbook. Should be part of an overall runlist

  • 0.3.8
    -- [] - Updated STIG and Audit rules to CIS RHEL Stig 1.4.0
    -- [] - Added CentOS 6 ruleset 3.2 - "Remove the X Window System"
    -- [] - Fixed and added many Serverspec tests
    -- [] - Corrected a typo in to correct STIG control number
    -- [] - Removed CIS wording from audit scripts
    -- [] - Enforced permissions on /boot/grub/grub.conf as per STIG 1.5.2
    -- [] - Removed grub.conf template
    -- [] - Updated mounting of /dev/shm to be idempotent

Collaborator Number Metric

0.6.2 failed this metric

Failure: Cookbook has 0 collaborators. A cookbook must have at least 2 collaborators to pass this metric.

Foodcritic Metric

0.6.2 passed this metric

License Metric

0.6.2 failed this metric

stig does not have a valid open source license.
Acceptable licenses include Apache 2.0, apachev2, MIT, mit, GNU Public License 2.0, gplv2, GNU Public License 3.0, gplv3.