cookbook 'sumologic-collector', '= 1.3.0'
sumologic-collector
(29) Versions
1.3.0
-
Follow15
Installs/Configures sumologic-collector
cookbook 'sumologic-collector', '= 1.3.0', :supermarket
knife supermarket install sumologic-collector
knife supermarket download sumologic-collector
sumologic-collector Cookbook
This cookbook installs the Sumo Logic collector or updates an existing one if it was set to use Local Configuration Mangement. Installation on Linux uses the shell script
installer and on Windows uses the exe installer. Here are the steps it follows:
- Sets up
sumo.conf
andsumo.json
(or the json folder). By default the standard Linux logs (system and security) are captured. On Windows the application and system event logs are captured. - Downloads latest installer
- Runs installer
- Starts collector and registers with the Sumo Logic service
For collector update, the existing collector must have been switched to use Local Configuration Mangement - see the instructions to
configure New Collectors
or Existing Collectors
for more details. The steps the cookbook follows:
- Verify that the collector folder exists.
- (Optional) Recreate
sumo.conf
andsumo.json
(or the json files under the json folder). - Restart the collector for the changes to take effect.
The collector Requires outbound access to https://collectors.sumologic.com.
Edit sumo.json
(or the json files under the json folder) to add/edit/remove sources. After installation you can
test connectivity.
Note
Starting from 19.107, there are 2 major extensions to SumoLogic collectors:
* You can configure a collector's parameters from a set of json files under a common folder. Each of the json file will represent a source on that collector. Updates made to a json file will then be reflected on its corresponding source. Note that the format of this kind of file is slightly different from that of the traditional single json file (sumo.json) and they are not compatible. You also need to use the parameter syncSources
instead of sources
inside sumo.conf
.
See more details here.
* You can change a collector's existing parameters through local configuration json file(s) continuously. Before this, using collector API was the only option.
More information about this is here
Installation
- Create an Access Key
- Install the cookbook in your Chef repo (your knife version should be at least 11.10.4 and you should have the knife github plugin installed):
knife cookbook github install SumoLogic/sumologic-collector-chef-cookbook
- Specify data bag and item with your access credentials. The data item should
contain attributes
accessID
andaccessKey
. Note that attribute names are case sensitive. If the cases mismatch, the values will not appear when chef-client runs. The default data bag/item is['sumo-creds']['api-creds']
. More flexible approach is to setnode.run_state['sumo_key_id']
andnode.run_state['sumo_key_secret']
to supply credentials from your wrapper cookbook level. Please note, storing sensitive data anywhere outside ofnode.run_state
is not safe, because it's being uploaded to the Chef Server at the end of chef-client run.node.run_state
is not persistent and generally discarded at the end of chef-client run. But you still want to make sure that credentials originates from a secure place, such as your own encrypted data bag, Chef Vault or alternative approach that stores and communicates your secrets in an encrypted manner. - (Optional) Decide if you want to use the Local Configuration Management feature by setting the attribute
default['sumologic']['local_management']
properly. By default this feature is on, to leverage the power of Chef. - (Optional) Select the json configuration option (i.e. through a single file or a folder) by setting the attribute
default['sumologic']['use_json_path_dir']
appropriately. By default a single json file is used. - (Optional) Check if the path to the json file or the json folder is set correctly in the attribute
default['sumologic']['sumo_json_path']
. By default this is the path to the json file at/etc/sumo.json
on Linux orc:\sumo\sumo.json
on Windows. - Upload the cookbook to your Chef Server:
knife cookbook upload sumologic-collector
- Add the
sumologic-collector
receipe to your node run lists. This step depends on your node configuration, so specifics will not be described in this README.md.
Attributes
<table>
<tr>
<td>['sumologic']['ephemeral']</td>
<td>Boolean</td>
<td>Sumo Logic Ephemeral Setting</td>
<td>Required</td>
</tr>
<tr>
<td>['sumologic']['installDir'] </td>
<td>String</td>
<td>Sumo Logic Install Directory</td>
<td>Required</td>
</tr>
<tr>
<td>['sumologic']['credentials']['bag_name']</td>
<td>String</td>
<td>Name of the data bag.</td>
<td>Required</td>
</tr>
<tr>
<td>['sumologic']['credentials']['item_name']</td>
<td>String</td>
<td>Name of the item within the data bag. </td>
<td>Required</td>
</tr>
<tr>
<td>['sumologic']['credentials']['secret_file']</td>
<td>String</td>
<td>Path to the local file containing the encryption secret key.</td>
<td>Optional</td>
</tr>
</table>
Resource/Provider
sumologic_collector
Provides actions for installing and managing a SumoLogic Collector
Actions
default
= :install_and_configure
:install
Installs an unconfigured and unregistered SumoLogic Collector. Use :configure
to configure it later
ruby
sumologic_collector 'C:\sumo' do
action :install
end
:install_and_configure
Installs and configures a SumoLogic Collector. This is the default action
ruby
sumologic_collector 'C:\sumo' do
collector_name 'fileserver'
sumo_access_id 'MYACCESSID'
sumo_access_key 'MYACCESSKEY'
proxy_host 'proxy.mydomain.com'
proxy_port '8080'
end
:configure
Configures a pre-installed but unconfigured (and unregistered) SumoLogic Collector
Note: The recommended flow to use this is to have the collector installed without
configuration or registration by using the :install
action
ruby
sumologic_collector 'C:\sumo' do
collector_name 'fileserver'
sumo_access_id 'MYACCESSID'
sumo_access_key 'MYACCESSKEY'
proxy_host 'proxy.mydomain.com'
proxy_port '8080'
action :configure
end
:remove
Uninstalls a SumoLogic collector using the provided uninstaller
sumologic_collector 'C:\sumo' do action :remove end
:start
Starts the SumoLogic Collector
sumologic_collector 'C:\sumo' do action :start end
:stop
Stops the SumoLogic Collector
sumologic_collector 'C:\sumo' do action :stop end
:restart
Restarts the SumoLogic Collector
sumologic_collector 'C:\sumo' do action :restart end
Attribute Parameters
See the Sumo Logic documentation
for more information about these attributes.
Attribute | Type | Description | Default | Required | Used Actions |
---|---|---|---|---|---|
dir |
String |
Directory where collector will be installed (name attribute) |
none | true |
all |
source |
String |
URL to download collector installer from | none (uses the latest installer from SumoLogic) | false |
:install , :install_and_configure
|
collector_name |
String |
Name of this Collector | nil |
false |
:install_and_configure , :configure
|
collector_url |
String |
URL used to register Collector for data collection API | nil |
false |
:install_and_configure , :configure
|
host_name |
String |
Hostname of this collector + default hostname of sources on it | nil |
false |
:install_and_configure , :configure
|
description |
String |
Description of this collector | nil |
false |
:install_and_configure , :configure
|
category |
String |
Default category for sources on this collector | nil |
false |
:install_and_configure , :configure
|
sumo_token_and_url |
String |
Encoded Setup Wizard token | nil |
false |
:install_and_configure |
sumo_access_id |
String |
Access ID used when logging in with Access ID and Key | nil |
false |
:install_and_configure , :configure
|
sumo_access_key |
String |
Access Key used when logging in with Access ID and Key | nil |
false |
:install_and_configure , :configure
|
proxy_host |
String |
Sets proxy host when a proxy server is used | nil |
false |
:install_and_configure , :configure
|
proxy_port |
String , Fixnum
|
Sets proxy port when a proxy server is used | nil |
false |
:install_and_configure , :configure
|
proxy_user |
String |
Sets proxy user when a proxy server is used with authentication | nil |
false |
:install_and_configure , :configure
|
proxy_password |
String |
Sets proxy password when a proxy server is used with authentication | nil |
false |
:install_and_configure , :configure
|
proxy_ntlmdomain |
String |
Sets proxy NTLM domain when a proxy server is used with NTLM authentication | nil |
false |
:install_and_configure , :configure
|
sources |
String |
Sets the JSON file describing sources to configure on registration | nil |
false |
:install_and_configure , :configure
|
sync_sources |
String |
Sets the JSON file describing sources to configure on registration, which will be continuously monitored and synchronized with the Collector's configuration | nil |
false |
:install_and_configure , :configure
|
ephemeral |
Boolean |
When true , the Collector will be deleted after goes offline for a certain period of time |
false |
false |
:install_and_configure , :configure
|
clobber |
Boolean |
When true , if there is any existing Collector with the same name, that Collector will be deleted |
false |
false |
:install_and_configure , :configure
|
disable_script_source |
Boolean |
If your organization's internal policies restrict the use of scripts, you can disable the creation of script-based Script Sources. When this parameter is passed, this option is removed from the Sumo Logic Web Application, and Script Source cannot be configured | false |
false |
:install_and_configure , :configure
|
disable_action_source |
Boolean |
If your organization's internal policies restrict the use of script actions, you can disable the creation of script-based action sources. When this parameter is passed, action sources will not execute on this collector. | false |
false |
:install_and_configure , :configure
|
disable_upgrade |
Boolean |
If true, the collector rejects upgrade requests from Sumo. | false |
false |
:install_and_configure , :configure
|
time_zone |
String |
The default time zone for sources on this collector | nil |
false |
:install_and_configure , :configure
|
target_cpu |
Integer |
Target to which to limit the CPU usage of this collector | nil |
false |
:install_and_configure , :configure
|
wrapper_java_initmemory |
Integer |
Override the initial Java heap size | nil |
false |
:configure |
wrapper_java_maxmemory |
Integer |
Override the maximum Java heap size | nil |
false |
:configure |
runas_username |
String |
Which user the daemon will run as | nil |
false |
:install_and_configure , :install
|
winrunas_password |
String |
On Windows, the password for the user the service will run as | nil |
false |
:install_and_configure , :install
|
skip_registration |
Boolean |
When true the collector will not register upon installation |
false |
nil |
:install_and_configure |
sumologic_collector_installer
Note: sumologic_collector_installer
has been deprecated, please use sumologic_collector
with the :install_and_configure
action (the default)
Allows for additional customisation of the Sumo Logic Collector installer
Actions
default
= :install
-
:install
- installs the Sumo Logic Collector if it is not already installed
Attribute Parameters
See the Sumo Logic documentation
for more information about these attributes.
-
dir
- Directory where the Collector will be installed -
source
- URL where installer will be downloaded from collector_name
collector_url
sumo_token_and_url
sumo_access_id
sumo_access_key
proxy_host
proxy_port
proxy_user
proxy_password
proxy_ntlmdomain
sources
sync_sources
ephemeral
clobber
runas_username
winrunas_password
skip_registration
Examples
# Installs the Collector on Windows and skips registration sumologic_collector_installer 'c:\sumo' do source 'https://collectors.sumologic.com/rest/download/win64' sumo_access_id node['SUMO_ACCESS_ID'] sumo_access_key node['SUMO_ACCESS_KEY'] skip_registration true end
Collector Sources
Attribute Parameters
The following attributes are common to all of the sources listed below.
See the Sumo Logic documentation
for more information about these attributes.
-
owner
- owner of the JSON Source configuration file -
group
- group of the JSON Source configuration file -
mode
- file mode of the JSON Source configuration file -
source_name
- name of the source. required -
source_json_directory
- directory where JSON Source configuration file will be stored. required description
category
host_name
time_zone
automatic_date_parsing
multiline_processing_enabled
use_autoline_matching
manual_prefix_regexp
force_time_zone
default_date_format
filters
alive
sumo_source_docker
Actions
default
= :create
-
:create
- creates a JSON Source configuration
Attribute Parameters
See the Sumo Logic documentation
for more information about these attributes.
The following attribute parameters are in addition to the generic parameters
listed above.
uri
specified_containers
all_containers
cert_path
-
source_type
- one of:docker_stats
,:docker_log
. required collect_events
Examples
sumo_source_docker 'docker_stats' do source_json_directory node['sumologic']['sumo_json_path'] source_type :docker_stats uri 'https://127.0.0.1:2376' all_containers true end sumo_source_docker 'docker_log' do source_json_directory node['sumologic']['sumo_json_path'] source_type :docker_log uri 'https://127.0.0.1:2376' all_containers true end
sumo_source_local_file
Actions
default
= :create
-
:create
- creates a JSON Source configuration
Attribute Parameters
See the Sumo Logic documentation
for more information about these attributes.
The following attribute parameters are in addition to the generic parameters
listed above.
-
path_expression
- required blacklist
encoding
Examples
sumo_source_local_file 'local_file' do source_json_directory node['sumologic']['sumo_json_path'] path_expression '/tmp/example' end
sumo_source_local_windows_event_log
Actions
default
= :create
-
:create
- creates a JSON Source configuration
Attribute Parameters
See the Sumo Logic documentation
for more information about these attributes.
The following attribute parameters are in addition to the generic parameters
listed above.
-
log_names
- required
Examples
sumo_source_local_windows_event_log 'local_win_event_log' do source_json_directory node['sumologic']['sumo_json_path'] log_names ['security', 'application'] end
sumo_source_remote_file
Actions
default
= :create
-
:create
- creates a JSON Source configuration
Attribute Parameters
See the Sumo Logic documentation
for more information about these attributes.
The following attribute parameters are in addition to the generic parameters
listed above.
-
remote_hosts
- required -
remote_port
- required -
remote_user
- required -
remote_password
- required -
key_path
- required key_password
-
path_expression
- required -
auth_method
- one ofkey
orpassword
. blacklist
Examples
sumo_source_remote_file 'remote_file' do source_json_directory node['sumologic']['sumo_json_path'] remote_hosts ['127.0.0.1'] remote_port 22 remote_user 'user' remote_password 'password' key_path '' path_expression '/tmp/example' auth_method 'password' end
sumo_source_remote_windows_event_log
Actions
default
= :create
-
:create
- creates a JSON Source configuration
Attribute Parameters
See the Sumo Logic documentation
for more information about these attributes.
The following attribute parameters are in addition to the generic parameters
listed above.
-
domain
- required -
username
- required -
password
- required -
hosts
- required -
log_names
- required
Examples
sumo_source_remote_windows_event_log 'remote_win_event_log' do source_json_directory node['sumologic']['sumo_json_path'] domain 'mydomain' username 'user' password 'password' hosts ['myremotehost1'] log_names ['security', 'application'] end
sumo_source_script
Actions
default
= :create
-
:create
- creates a JSON Source configuration
Attribute Parameters
See the Sumo Logic documentation
for more information about these attributes.
The following attribute parameters are in addition to the generic parameters
listed above.
-
commands
- required file
working_dir
timeout
script
cron_expression
Examples
sumo_source_script 'script' do source_json_directory node['sumologic']['sumo_json_path'] commands ['/bin/bash'] cron_expression '0 * * * *' end
sumo_source_syslog
Actions
default
= :create
-
:create
- creates a JSON Source configuration
Attribute Parameters
See the Sumo Logic documentation
for more information about these attributes.
The following attribute parameters are in addition to the generic parameters
listed above.
protocol
port
Examples
sumo_source_syslog 'syslog' do source_json_directory node['sumologic']['sumo_json_path'] end
sumo_source_graphite_metrics
Actions
default
= :create
-
:create
- creates a JSON Source configuration
Attribute Parameters
See the Sumo Logic documentation
for more information about these attributes.
The following attribute parameters are in addition to the generic parameters
listed above.
protocol
port
Examples
sumo_source_graphite_metrics 'graphite' do source_json_directory node['sumologic']['sumo_json_path'] end
Contributing
Please see CONTRIBUTING.md for guidelines
License and Authors
Authors:
Ben Newton (ben@sumologic.com), Duc Ha (duc@sumologic.com)
Dependent cookbooks
This cookbook has no specified dependencies.
Contingent cookbooks
CHANGELOG for sumologic-collector
This project adheres to Semantic Versioning.
This CHANGELOG (now) follows the format listed at Keep A Changelog
Unreleased
1.3.0 - 2018-04-19
Added
- using node run state added as a viable option to supply credentials
- when using the lwrps it calls
sumo_service
which attempts to use systemd if present. We should allow overriding this behavior with the same attribute as was added in PR#145 to change the behavior. If the attribute is unset it uses the existing logic to determine the appropriate init subsystem making this backwards compatibile. (@majormoses)
[1.2.23] - 2017-10-12
Added
- the ability to use
node['sumologic']['init_style']
to specify an override for an init subsystem while keeping the same defaults of delegating that to ohai detection. - Support setting a resource-configured collector's
hostName
,description
,category
,disableActionSource
,disableUpgrade
,timeZone
, andtargetCPU
.
[1.2.22] - 2017-08-15
Added
- allow setting max_memory to control memory consumption : PR#128 (@dannenberg)
- allow pinning version of chef-vault gem : PR#123 (@dhui)
Changed
- make travisci tests do what users expect them to : PR#134 (@majormoses)
- updates for ubuntu 16.04, chef 13, fewer restart notifications, configure more java properties, misc kitchen platform updates : PR#122 (@RoboticCheese)
- misc CHANGELOG updates : PR#137 (@majormoses)
1.2.21 - 2017-06-12
Changed
- appease CI, misc repo cleanup : Merged PR#125, 130 (@zl4bv, @majormoses)
1.2.20 - 2017-04-26
Changed
- revert buggy changes: Undo PR#113 (@duchatran)
1.2.19 - 2017-03-29
Changed
- prevent unnecessary collector restarts by only converge if changed : Merge PR#113 (@dannenberg)
1.2.18 - 2017-02-07
Added
- Adds the ability to define the source categories for the default files created in the json source folder.
1.2.17 - 2016-07-19
Added
- Add service retries attempts and delays, fixed online help doc link : Merged PR#85,86 (@kquinsland, @meringu)
1.2.15 - 2016-05-26
Fixed
- Fix windows service collector name issue 61: Merged PR#77 (@wenwolf)
- Chef 11 compatibility improvements : Merged PR#76 (@elyobo)
1.2.14
Added
- Add
:disable
and:enable
actions to sumologic-collector, among other things: Merged PR#74 (@KierranM)
1.2.13
Fixed
- Use the proper net command to restart, start, and stop the collector on windows: Merged PR#72 (@KierranM)
1.2.12 - 2016-04-19
Added
- Add a new
sumologic_collector
resource : Merged PR#71 (@KierranM)
1.2.11 - 2016-03-21
Fixed
- fixing typo with
forceTimeZone
: PR#67 (@zl4bv)
1.2.10 - 2016-03-04
Added
- Added LWRP resources for source config files : Merged PR#64 (@zl4bv)
1.2.9 - 2016-02-25
Added
- Platform-family-specific install recipes
- Windows 2008r2 and 2012r2 support and testing
1.2.8 - 2016-02-19
Added
- Debian 8.1 support and testing
1.2.7 - 2016-02-19
- Add action for debian 8.X
- Add support for ChefVault
- Ensure sumo-collector is running
1.2.6
Added
- Add support for restarting the collector on
Windows
1.2.5 - 2015-10-08
Added
- Add basic serverspec testing
[1.2.0]
Added
- Updated cookbook to support Access IDs and Keys
- Updated cookbook to support Local Collector Management and JSON directory option.
[0.1.0] - 2015-09-02
- Initial release of sumologic-collector
Check the Markdown Syntax Guide for help with Markdown.
The Github Flavored Markdown page describes the differences between markdown on github and standard markdown.
Collaborator Number Metric
1.3.0 failed this metric
Failure: Cookbook has 1 collaborators. A cookbook must have at least 2 collaborators to pass this metric.
Contributing File Metric
1.3.0 passed this metric
Foodcritic Metric
1.3.0 passed this metric
No Binaries Metric
1.3.0 passed this metric
Testing File Metric
1.3.0 passed this metric
Version Tag Metric
1.3.0 passed this metric
1.3.0 failed this metric
1.3.0 passed this metric
Foodcritic Metric
1.3.0 passed this metric
No Binaries Metric
1.3.0 passed this metric
Testing File Metric
1.3.0 passed this metric
Version Tag Metric
1.3.0 passed this metric
1.3.0 passed this metric
1.3.0 passed this metric
Testing File Metric
1.3.0 passed this metric
Version Tag Metric
1.3.0 passed this metric
1.3.0 passed this metric
1.3.0 passed this metric